打包箱在我們的日常生活中有著廣泛的應用——不管是住人、商業用途、倉庫，都是一個好的選擇。對于有問題的住人打包箱，如果不能及時發現，對于房屋的損壞也是很嚴重的，甚造成人員受傷。因此在移交濟南打包箱時，一定要進行嚴格的檢查。

Packaging boxes have a wide range of applications in our daily lives - whether it's for residential, commercial, or warehouse use, they are all a good choice. For problematic residential packaging boxes, if not detected in a timely manner, it can also cause serious damage to the house and even cause personal injury. Therefore, strict inspection must be carried out when handing over Jinan packaging boxes.

一、外部檢查——檢查箱體各方位的表面是否有破損、變形等情況。如有，必須立即進行修理。

1、 External inspection - Check the surface of the box in all directions for damage, deformation, etc. If any, immediate repairs must be carried out.

二、內部檢查——檢查其有無漏水、透光、污漬等。

2、 Internal inspection - check for leaks, light transmission, stains, etc.

三、門、鎖檢查——門縫的水密性、門鎖是否齊全；門是否能順場地反復開關。

3、 Door and lock inspection - the water tightness of the door seam and whether the door lock is complete; Can the door be opened and closed repeatedly along the field.

四、清潔檢查——主要檢查箱內有無殘留物、污染物，室內是否潮濕。如有不合格，請進行清潔甚更換容器。

4、 Cleaning inspection - mainly checks whether there are residues, pollutants in the box, and whether the room is damp. If there are any nonconformities, please clean or even replace the container.

五、附件檢查——如打包箱加強圈的連接狀態。也有對集裝箱立柱和延伸結構的檢查。

5、 Attachment inspection - such as the connection status of the reinforcing ring of the packaging box. There are also inspections of container columns and extended structures.

在產品出廠前，會對每個打包箱進行嚴格檢查。但是還會有可能不可避免地會出現一些問題，所以進行相關事項的驗收是非常有必要的，希望以上分享能幫助大家。更多事項就來我們網站http://www.shtyelec.com咨詢吧！

Before the product leaves the factory, each packaging box will be strictly inspected. However, there may inevitably be some problems, so it is very necessary to conduct acceptance of related matters. I hope the above sharing can help everyone. For more information, come to our website http://www.shtyelec.com Consult!